Filter
Top Products
3
2M-Z15782, Toastmaster Heater Proofer 9451-HP Series
Size Specications
Exterior Interior
Weight
Shipping
Height Width Depth Height Width Depth
9451-HP12 30.3125” 22.8125” 33.3125” 15.625” 18.125” 27.5” 100lbs
9451-HP34 67.5625” 23.3125” 33.875” 51.75” 18.125” 27.5” 140lbs
Electrical Specications
Model Volts Watts Phase Hz NEMA
9451-HP12CC
120V 1.5 kW 1 50/60 Hz 5-20P
9451-HP12CD
9451-HP12CDN
9451-HP12SDB
9451-HP34CD
9451-HP34CDN
9451-HP34SDN
9451-HWHSFR
E9451-HP12SD
E9451-HP34SD
Front
Top
Side
IL2431
Depth
Width
Height
The Heater Proofer is an aluminum transport cabinet with heaters to function
as a hot food holding cabinet, and/or as a proong cabinet.
The heater, or heat drawer, is slid into place on the oor of the cabinet. An
electrical socket on the back of the drawer is provided to accept the supplied
power cord, which is plugged into the drawer through an access hole in the
back of the cabinet.
The main power switch on the front of the drawer, when switched “ON”, will
turn on the light in the switch and turn on the air circulating fan in the drawer.
The circulating fan will operate continuously while the unit is “ON”.
The thermostat control knobs are mounted to the left and right of the heat/proof
switch. The left thermostat knob controls the heat in the cabinet from 1 (low
heat: approximately 80°F) to 9 (high heat: approximately 185°F). The right
thermostat knob controls the humidity from 1 (approximately 20% relative
humidity) to 9 (in excess of 100% relative humidity). Average setting will be
approx. 6 (approximately 85% relative humidity).
9451 HP SERIES SERVICE SPECIFICATIONS