Filter
Top Products
5
At the selected wake-up time if both the alarm and the auto-snooze functions are activated the alarm will turn on for 2 minutes
and then enter the auto snooze mode. The alarm will turn off for the number of snooze minutes that you selected above and
then turn on again for 2 minutes. During snooze operation the snooze indicator flashes in the display. The alarm/snooze
cycle can be repeated a total of 3 times, but after the third time the alarm resets for the following day and the snooze indicator
stopstops flashing. When the alarm turns on you may press any button on the front panel (except the SET button) to stop
the alarm sooner and begin the auto snooze cycle immediately. The alarm will turn on again in 2 minutes.
Remember that if only the alarm indicator appears in the display the alarm will turn on at the selected time for 2 minutes
and can be stopped and reset by pressing any button on the front panel except the SOUND button.
If both the alarm indicator and the snooze indicators appear in the display the alarm will turn on for 2 minutes and
then enter the auto snooze mode for the number of minutes that you selected. This cycle can be repeated up to 3 times and
then the alarm will reset for the same time the following day.
Sleep to Soothing Sounds with Auto-Shutoff
You may program the soothing sounds to play for up to 60 minutes and then shut off automatically.
1. Press the TIME button. The display will show “0:10” which is the initial default Sleep Timer setting. Continue to press the
TIME button to increase the Sleep Timer setting as follows: 0:10 -> 0:20 -> 0:30 -> 0:40 -> 0:50 -> 1:00 -> 0:10 -> etc.
2. When the display is showing the desired amount of Sleep Time Press the SOUND button to begin playback of the
soothing sound. To change to a different soothing sound press the SOUND button once to stop playing the current
sound and press again to begin playing the next sound. Repeat this process until you hear the desired sound. The
number of the selected sound will appear in place of the Date indicator.
3. Press the UP or DOWN button to adjust the volume level of the soothing sound.
4. The display will begin counting down from the time you selected. The remaining minutes and seconds will appear in the
display. As the soothing sounds are playing the color of the display and inside the cabinet will change every 5 seconds.
To pause the soothing sounds press the SOUND button once. To resume playback of the soothing sound Press the
SOUND button again.
5. When the display counts down to “0:00” the soothing sounds shut off automatically. To shut off the soothing sound
before the display counts down to 0:00, press the MODE button. The soothing sound stops and the display returns to
current time.
Countdown / Reminder / Nap Timer
This clock includes a countdown timer that can be used to remind you of an appointment, meeting, or any other event, or
when taking a nap, without disturbing your normal wake-up alarm setting. The countdown timer can be set for up to 24
hours in advance. When the timer counts down to “00” the alarm turns on for one minute.
Operating Instructions