Filter
Top Products
14
3. Use the ƽ Function Switch, ƾ Tuning Thumbwheel and ƹ Volume Thumbwheel to select your Alarm-
2 wake up sound settings. For more information, see the Listening to the Radio section of this manual.
4. When you’ve made your Radio or Nature Sound settings, press the ᕨ Alarm-2 Button or wait a few
seconds to return to the standard display. The Alarm-2 Indicator will appear on the display, showing that
Alarm 2 is set.
5. To disarm the alarm, press the ᕨ Alarm 2 Button once. To re-arm, press the ᕨ Alarm 2 Button for 2
seconds.
Turning Off the Alarm
• After the alarm sounds, press the ᕡ Power Off Button to turn off the alarm. The alarm will be automatically
reset for the same time the following day.
Note: If more than one alarm is set, pressing the ᕡ Power Off Button to stop the alarm that is sounding will
not affect the other alarm, which will turn on at the time it is set for.
• If you do not want the alarm to turn on the following day, press the corresponding alarm button once until
the alarm indicator is turned off.
• If the alarm is not turned off once it sounds, it will continue for approximately one hour, then turn off
automatically. This cycle will repeat every 24 hours unless the controls are changed.
Alarm Operation