Filter
Top Products
12
Listening to Radio and Nature Sounds
Antenna Information
FM – Fully extend the FM wire antenna and vary the direction to find its strongest signal.
AM – The AM bar antenna is inside the cabinet, Rotate the cabinet until you find the strongest AM signal.
1. Press the ᕢ On/Sleep Button to turn the radio on.
2. The display will show the current radio frequency. Slide the ƽ Function Switch to select AM, FM or Sounds.
If you choose sounds, use the ƺ Sound Select Switch to choose the nature sound you like.
3. For listening to AM or FM radio, rotate the ƾ Tuning Wheel to find the station you desire. If you stop tuning
for about 5 seconds the display will change back to show the time. Begin tuning again or press the ᕩ
Display Button to show the radio frequency again.
4. Rotate the ƹ Volume Wheel to adjust the volume to a comfortable level.
5. Press the ᕡ Power Off Button to turn the radio off.
Note: If you press the ᕢ On/Sleep Button more than once while the radio or sound is turning on, you will enter
Sleep mode.
Sleep to Radio/Nature Sounds
1. Press the ᕢ On/Sleep Button twice. The sleep timer will appear on the display and the Sleep indicator
will appear in the upper right corner. The sleep timer will begin at 90 minutes.
2. If you would like the sleep timer to be set for less than 90 minutes, continuously press ᕢ On/Sleep Button
until you find the time interval (90-60-30-15 minutes, OFF) you prefer.
3. To turn off the radio before the sleep timer has expired, press the ᕡ Power Off Button.