Filter
Top Products
EN
5
Connecting to Computer
Charging the Battery
The player’s battery can only be charged
through the USB port of a computer.
1. Open the cover of the USB jack and
connect the smaller end of the USB
extension cable to the USB jack on the
player.
2. Insert the larger end of the USB
extension cable into the USB port on
the computer tightly. Once connected,
the display shows as below:
3. Press and hold to enter battery
charging mode. The display shows as
below with the battery icon
animating.
• Charge the unit for at least 2 hours
before first use.
•You can still transfer files to the player
in the battery charging mode.
• When the battery is full, the display
shows “Battery full”.
Attention: Do not separately recharge,
disassemble, incinerate, or expose to high
temperatures over 45ºC (113ºF). Examples of
high temperatures that may damage your
product include leaving it in a locked car in the
summer, the dashboard of car or putting it on
top of other heat generating electronics devices
(such as power amplifiers and computer
monitors.
Transferring Files to the
Player
You should refer to the software manual
for details in software installation,
connecting your player with the
computer and transferring files to the
player.
Attention: Do not disconnect
the USB connection during
music download. Doing so may
corrupt system files or the files being
downloaded.
Note: The player will
automatically go to battery
charging mode if the battery
level is low.