Filter
Top Products
10
USING THE ALARMS
SETTING THE ALARMS
You can set two completely separate alarm times (ALARM 1
and ALARM 2) and activate either or both of them to wake
you with a buzzer, radio, or music from a docked iPod.
Changing Alarm 1 settings:
Press the • AL. SET/OFF a button to display the current
settings for Alarm 1.
Press the • PRESET/ARROW
> or < button to set the
hours for the alarm wake-up time.
Press the • SELECT button to save this setting.
The minutes digits will now ash.
Press the • PRESET/ARROW
> or < button to set the
minutes for the alarm wake-up time.
Press the • SELECT button to save this setting.
The alarm setting sequence will close.
Changing Alarm 2 settings:
Follow the above steps, but pressing the AL. SET/OFF b
button in place of the AL. SET/OFF a button.
Checking Alarm 1 or 2 settings:
Press the • AL. SET/OFF a (or b) button.
The current settings for ALARM 1 will appear on the display.
Press the • AL. SET/OFF a (or b) button again to return
to normal operation.
Switching Alarm 1 or 2 On or O:
Press the • AL. SET/OFF a (or b) button.
Press the • PRESET/ARROW
> or < button to switch
Alarm 1 (or 2) On or O.
When set, the status of the Alarm(s) selected will be shown on
the display.
SETTING THE ALARM TO WAKE YOU
To set the alarm to wake you:
Check that the Alarm 1 or Alarm 2 symbols are displayed •
as required. If not, set the Alarm(s) On as described in
the previous section.
If you have set either wake up mode to DAB or FM, check •
that you have tuned the radio to a station.
If you have set either wake up mode to ‘iPod’, make sure •
that your iPod is docked.
Set the radio to Standby (or set the SLEEP function).•
The radio will switch o and the time and date will be displayed
with the Alarm Symbol(s) when set.
WHEN THE ALARM WAKES YOU
The alarm will wake you at the set times with your choice of
wake-up mode. The volume will gradually increase in level
until turned o.
To turn o the alarm you can choose to set snooze, which will
reset the alarm for a further 9 minutes, or to switch it o.
To set snooze:
To set snooze, press the • SNOOZE button.
The alarm will stop and the snooze time will count down on the
display. After 9 minutes the alarm will sound again.
To switch o the alarm:
To switch o the alarm, press the • STANDBY/ON button.
The unit will set to Standby.
ALARM REPEAT
Once set, the alarm(s) will sound at the same time(s) each
day until turned o.
Alarm 1 set
In this example, Alarm 1 is set to play DAB radio at 08:15.
If Alarm 1 is switched o, press the • PRESET/ARROW
>
or
< button to switch Alarm 1 On.
NOTE: You can only change alarm settings when the alarm
is switched on.
Press the • SELECT button.
The current wake-up mode setting will ash on the display.
Press the • PRESET/ARROW
> or < button to select the
alarm wake-up mode for Alarm 1.
Press the • SELECT button to save this setting.
The current wake-up time will be shown with the hours digits
ashing.
Alarm 1 wake up mode
Alarm 1 ON/OFF
Alarm 1 time
Alarm 2 set