Filter
Top Products
24
Erase or Unfinalize a CD-RW
The remaining time for the operation appears in the display.
When the operation has been finished, the display returns to
the track/time display.
During erasing/unfinalizing, no buttons will work.
Never turn the power off nor unplug the power cord.
<
This operation cannot be undone. If you are going to erase a
track or tracks, make sure that they are recordings that you
really want to erase.
It is possible to erase the last recorded track. It is also possible to
erase a whole disc.
Erase procedures are possible only on an unfinallized CD-RW
disc. If a CD-RW disc has been finalized, unfinalize it prior to
erasure. Remember that it is not possible to perform any erase or
unfinalize procedures on a CD-R disc.
Press the CD button to select “CD”.
1
Load a recorded CD-RW.
2
Press the ERASE button in the stop mode.
3
“Un FIn” (unfinalize) appears when a finalized disc is loaded.
“Er” and the last track number appear when the disc hasn’t
been finalized. Each time the ERASE button is pressed, the
display changes as follows:
“Er” and the number of the last track recorded on the disc
Select this to erase the last track on the disc.
<
This will not appear when only one track is recorded on the
disc.
Er ALL
Select this to erase all the tracks.
<
To cancel the erasing or unfinalizing process, press the STOP
button (H
).
Press the PLAY button (y ) to start erasing or
unfinalizing.
4
223
1 4