Teac Multi music player/CD recorder Portable CD Player User Manual


 
15
Listening to a CD 1
Press the OPEN/CLOSE button (L).
2
Place a disc on the tray with the printed label face up.
3
< Never place more than one disc on the tray.
<
The disc must be placed in the center of the disc tray. If the
disc is not correctly loaded, it may not be possible to open the
tray again once it has closed, so you should ensure the disc is
always centered on the tray.
<
Do not force the tray by hand during opening and closing
operations.
Press the OPEN/CLOSE button (L) to close the tray.
4
Press the PLAY button (y) to start playback.
5
Disc playback starts from the first track, and the PLAY
indicator (y
) lights on the display.
<
If you load the disc, and then press the PLAY button without
having first closed the disc tray, the disc tray closes and
playback starts.
Press the CD button.
1
--
” blinks for a few seconds.
When no disc is set, “nOdISC” appears on the display.
<
It takes a few seconds for the unit to load the disc. No
buttons will work during loading. Wait until the total number
of the tracks and the total play time of the disc are displayed.
2 43
1 5
disc type indicator
total play time of the disctotal number of the tracks
< The disc type indicator shows the type of disc currently
loaded.
CD:
A commercial pre-recorded CD
CD-R:
A finalized CD-R
CD-RW:
A finalized CD-RW
NO TOC CD-R:
A CD-R which has yet to be finalized
NO TOC CD-RW:
A CD-RW which has yet to be finalized
blank:
No disc or unreadable disc