Filter
Top Products
.15.
2. Press the " " button to power on the
system from standby mode.
3. Select tuner mode with the SOURCE button.
4. Select a desired radio station for listening.
5. Move the antenna around to get the best
reception.
6. If necessary, adjust the volume level.
Listening to Tuner
Listening to a Station
Note: Position the antenna as far away as
possible from the AC adapter, a TV, or other
radiation source.
1. Plug the supplied FM antenna into the
FM.ANT jack located on the back of unit.
Press the Button
Functions
Unit Remote Control
/
Hold this button to enter saving mode. Press to save a channel.
(see "Presetting a station”)
Switch between the frequency display and channel number display.
Tune the desired frequency or channel number based on the
different display.
Select a channel (from 01 to 20).
Change frequency from 87.5MHz to 108.0MHz in FM mode.
Hold for more than one second to activate the Auto Scan function,
and then release the button. The frequency will be scanned
automatically until a radio station is found. Or press again to quit
search while searching.
LCD Display
LCD Display
FM Antenna
Frequency display Channel number display
1. Select tuner mode with the SOURCE button.
2. Switch to the frequency display if the display
is channel number.
3. Tune a desired frequency. You can use either
of the below methods to tune the frequency.
Presetting a Station
LCD Display