Filter
Top Products
48
Using the Menu
Adjusting playback
modes
To select playback
direction mode
Press MENU repeatedly to set
the cursor in the display to
MODE. Then press SET to select
the desired mode.
To play Select
both sides repeatedly s
both sides once d
from the FWD side
To skip a long blank space
— the BL SKIP mode
When the BL SKIP mode is on,
the tape is fast-forwarded to the
next track if there is a blank
space of longer than 12 seconds.
You will hear repeated sets of
three short beeps when skipping
a blank.
On the main unit:
1 Press MENU repeatedly to set
the cursor in the display to BL
SKIP.
2 Press SET to show “ ”.
On the remote control:
1 Press MODE repeatedly to
show “BL SKIP”.
To play a tape recorded
with Dolby* B NR system
Press MENU repeatedly to set
the cursor in the display to ;
NR (Dolby noise reduction).
Then press SET to show “ ”.
* Manufactured under license from
Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
Emphasizing Sound
On the main unit:
1 Press MENU repeatedly to set
the cursor in the display to
SOUND.
2 Press SET repeatedly to select
the sound emphasis of your
choice.
On the remote control:
1 Press SOUND repeatedly.
With each press, the
indications change.
The indications change as
follows:
RV : Sound Revitalizer.
Emphasizes treble sound.