Filter
Top Products
Setting Up24
4 Using the player on car battery
Insert one end of the supplied car battery cord (DCC-
EC12) to the DC IN 10.6 – 12 V socket located on the
side of the player, and the other end to a cigarette
lighter socket.
To replace the fuse of the car battery cord
Be sure to use the fuse with the correct amperage.
(4 A, 125 V, length 31.75 mm)
Notes
• Use only the supplied
car battery cord (DCC-
EC12). Do not use any
other car battery cord.
Polarity of the plug
• Use the supplied car
battery cord only with
a negative # grounded
car that uses a 12 V
battery.
• If the inside of the
cigarette lighter socket
is dirty with ashes, etc.,
the plug of the car
battery cord may
become heated due to a
bad contact. Before
connecting the cord, be
sure to clean the socket.
• When listening to the
radio on this player, the
car battery cord may
cause noise. Extend it
as long as possible, and
keep it as far away as
possible from the
player.
to a cigarette lighter socket
DC IN 10.6 – 12 V
Remove
Plug end
Tighten
Cigarette lighter plug
Fuse
Preparing the power sources (continued)