Filter
Top Products
Editing recorded tracks on the MD
40
GB
Note
After you
stop
recording,
do not disconnect the
AC power cord or
move the player
while “TOC EDIT” is
flashing in the
display. If you do so,
recording may not be
done properly.
5 Turn the jog dial counterclockwise or clockwise to
select the characters.
6 Press ÷.
The cursor shifts
rightward and waits for
the input of the next
character.
7 Repeat steps 4 through 6 to complete the entire
name.
8 Press ENTER•YES.
The name has been labeled on the MD.
Labeling a track
1 Play the track you want to label.
2 Press EDIT repeatedly until “Track Name”
appears in the display.
3 Press ENTER•YES.
One-track repeat play starts. If the track name has
been already labeled, the track name appears in
the display.
4 Input the characters according to steps 4 through 8
of “Labeling an MD.”
The name has been labeled on the track.
Display
Cursor
Labeling recordings (Name function) (continued)