Filter
Top Products
13
EN
Playing Back
Playing Back
Tips
• If the tape-corder
remains in the pause
mode for five minutes
or more, the tape-corder
will enter the stop mode
automatically in order
to protect the head and
tape.
• If the tape-corder
remains in the stop
mode for three minutes
or more, the tape-corder
will enter the low-
power consumption
mode automatically (see
page 26) to protect the
tape and to conserve the
battery (except in the
monitoring mode).
Notes
• The AMS function will
not operate if the Start
IDs are not written. (See
page 19.)
• The AMS function may
not operate properly
with a DAT cassette
recorded on another
DAT deck.
* Automatic Music Sensor
To fast-forward/rewind while monitoring the
sound
You can fast-forward (cue) or rewind (review) while
monitoring the sound.
Cue Press and hold )/+ in the
playback mode. When the
button is released, normal
playback resumes.
Review Press and hold =/0 in the
playback mode. When the
button is released, normal
playback resumes.
To high speed cue/review
High speed cue Press PLAY ( and )/+
during playback.
High speed review Press PLAY ( and =/0
during playback.
To locate the beginning of a program (track)—
AMS* function
You can locate the beginning of a program (track) in the
playback, fast-forward/rewind, and stop modes.
Playback mode: Press )/+ or =/0 quickly.
Fast-forward/rewind mode: Press )/+ or =/0
once.
Stop mode: Press )/+ or =/0 twice.
To locate the beginning Press )/+ once/repeatedly
of the next/succeeding
program (track)
E.g.: When locating the
beginning of the
fifth succeeding
program (track)
To locate the beginning Press =/0 once/repeatedly
of the current/previous
program (track)
E.g.: When locating the
beginning of the
fourth previous
program (track)
including the current
program (track)