Filter
Top Products
NW-S203F/S205F.GB.2-699-315-12(2)
52
52
Changing the USB Connection Setting
(USB Power)
Depending on how you are using the computer, if the power supply (USB Bus
Powered) is insufficient, incomplete data transfer may occur from the
computer to the player. In this case, setting the USB connection (USB Power)
to “100mA” may improve data transfer. “500mA” is set by default.
to
button
DISP/HOME button
to
Shuttle switch
Note
You cannot set this during the USB connection.
Press and hold the DISP/HOME button until the HOME screen
appears.
Rotate the shuttle switch to select (SETTINGS) and press the
button to conrm.
Rotate the shuttle switch to select “Advanced Menu>” and press the
button to conrm.
Rotate the shuttle switch to select “USB Power>” and press the
button to conrm.
Rotate the shuttle switch to select “100mA” or “500mA” and press
the
button to conrm.
To return to the previous menu
Press the DISP/HOME button.
Hints
When you connect the player to a laptop computer, we recommend to connect the
laptop computer to a power supply.
The charging time will be longer if the “USB Power” is set to “100mA.”
Settings
Table of
Contents
Index
Menu