Filter
Top Products
The Timer22
Waking up to music (continued)
Tips
• The display window
dims while the waking
up timer is on.
• You can have the
player go on the next
day at the same time.
Just press STANDBY
until the t indication
appears in the display.
The preset settings
remain until you reset
them.
Note
The timer mode is
canceled:
– when you press
TAPE or ( PLAY
while music plays in
the timer mode.
– when you select
“TAPE” using
FUNCTION on the
remote.
6 Press TIME SET +/– to set the volume, then
DISPLAY/ENTER/MEM.
7 Press STANDBY.
The t indication lights up and the power goes off.
At the preset time, the power will go on and music
will play.
To check/change when the playback will start
Press TIMER, then DISPLAY/ENTER/MEM. Each
time you press DISPLAY/ENTER/MEM, a stored
setting lights up. Change the setting if you need to
when the setting lights up. when you finish checking,
press TIMER again.
To use the player before a timer playback starts
Just turn on the player, and then you can use it.
If you turn off the player before the preset time, timer
playback will start at the preset time.
In case of the radio, however, if you listen to the
station which is different from the one you tuned in
in step 1 on page 21, you will hear that station at the
preset time. Make sure to tune in the station you want
to listen to before you turn off the player.
To stop play
Press POWER.