Basic Operations
Basic Operations
11
3 Start recording.
To record from the CD player
and the radio, press r on deck B
(( is depressed automatically).
To record from the tape, press r
on deck B (( is depressed
automatically), and then press (
on deck A. (For high speed
dubbing, press HI-SPEED
DUBBING instead.)
Deck B
Deck B
Deck A
To Press
Stop recording p6 on deck B
Pause recording P on deck B
Press the button again to
resume recording.
Turn on/off the player POWER
Use these buttons for additional operations
Tips
• Adjusting the volume or
the audio emphasis (see
page 27) will not affect
the recording level.
• If the AM program
makes a whistling
sound after you've
pressed r in step 3, set
the ISS (Interference
Suppress Switch) at the
rear to the position that
most decreases the
noise. Normally set the
switch to “2”.
• For the best results, use
the AC power as a
power source and use
TYPE I(normal) tape for
recording.
• To erase a recording,
proceed as follows:
1 Disconnect the
microphone if
connected to the MIX
MIC jack.
2 Press TAPE until
“TAPE” appears in
the display window.
3 Press r .
POWER
P
p6
