Filter
Top Products
28
Troubleshooting
Symptom
Playback starts from the
point you stopped. (resume
function)
Rustling noise is heard from
the CD.
When closing the lid of the
CD player, the CD starts to
rotate.
You cannot operate the CD
player properly using the
remote control.
The LCD display becomes
hard to see or slows down.
“ ” is flashing quickly in
the display, and you cannot
locate the beginning of the
track or the specific point in
the track.
Cause and/or corrective actions
c
The resume function is working. To start playing from the first
track, press and hold the jog lever during stop until the first track
starts playing, or open the lid of the CD player. Or, remove all
power sources, then insert the batteries or connect the AC power
adaptor again. (pages 7, 8, 19, 22)
c
Close the lid of the battery compartment firmly. (page 19)
c The CD player is reading the information on the CD. It is not
malfunctioning.
c The buttons on the CD player are kept pressed by mistake.
c You are using your CD player at high temperatures (above 40°C/
104°F) or at low temperatures (below 0°C/32°F). At room
temperature, the display will return to its normal operating
condition.
c The CD player has entered the Bookmarked track play mode.
Press P MODE/ twice so that the player returns to the normal
play mode.