Filter
Top Products
Operation/Playback
Symptom Cause and/or corrective action
The playing time is too short. The
CD does not play.
Check that you are using an alkaline battery and not a
manganese battery.
Replace the dry battery with a new LR6 (size AA) alkaline
battery (
page 13).
Charge and discharge the rechargeable battery several times
(
page 11).
Certain tracks cannot be played.
You tried to play files saved in a format that is not compatible
with this player (
page 5).
Change the setting of “CD-EXTRA” in the OPTION menu.
You may play your CD (
page 28).
“Lo Batt” appears on the display,
and the CD does not play.
The rechargeable battery is used up completely. Charge the
battery (
page 11).
Replace the dry battery with a new LR6 (size AA) alkaline
battery (
page 13).
“Hi DC in” appears on the display.
An AC power adaptor which is rated higher than the one
supplied or recommended is being used. Use only the supplied
AC power adaptor or the car battery cord recommended in
“Optional Accessories” (
page 36).
The CD does not play, or “No Disc”
appears on the display when a CD
is placed in the player.
The CD is dirty or defective. Clean it or change it.
Check that the CD is inserted with the label side up
(
page 16).
Moisture condensation has occurred. Leave the CD player
aside for several hours until the moisture evaporates.
Close the lid of the battery compartment firmly (
page 11).
Make sure the battery is inserted correctly (
page 11, 13).
Connect the AC power adaptor to an AC outlet securely
(
page 15).
Press
after one second or more has passed since the AC
power adaptor was connected.
The CD-R/CD-RW in the player is blank.
There is a problem with the quality of the CD-R/CD-RW,
recording device, or application software.
The OPR lamp flashes on the
player when you press a button,
and the CD does not play.
The buttons are locked. Slide the HOLD switch back
(
page 18).
32
D-NE20/NE20LS.GB.2-318-320-15(1)