Filter
Top Products
25-GB
NW-E50/E70/E90 GB/CS 3-267-071-13(1)
Adjusting the settings of your Network Walkman
Switching to the manual
mode
1 Press the MENU button.
The menu screen is displayed.
2 Rotate the Shuttle switch to select
“VOL: SET.”
VOL :SET>
3 Press the Nx button to confirm.
“SET >” blinks.
4 Rotate the Shuttle switch to select
“MAN.”
VOL :MAN
5 Press the Nx button to confirm.
6 Press the MENU button.
The display returns to the normal screen.
With this setting, you can adjust the volume
level by pressing the volume button.
4 Rotate the Shuttle switch to select “SET
>.”
VOL :SET>
5 Press the Nx button to confirm.
“VOL LO xx”* blinks.
* “xx” stands for numeric values of the
volume level.
VOL LO xx
6 Set volume levels of three preset levels:
LO, MID, or HI.
1 Press the VOLUME +/– button to set the
volume level of the LO preset.
2 Rotate the Shuttle switch to select “VOL
MID xx,” and then press the VOLUME
+/– button to set the volume level of the
MID preset.
3 Rotate the Shuttle switch to select “VOL
HI xx,” and then press the VOLUME +/–
button to set the volume level of the HI
preset.
7 Press the Nx button to confirm.
8 Press the MENU button.
The display returns to the normal screen.
With these settings, you can adjust the
volume level to any of three preset levels:
LO, MID, or HI.
To cancel the menu mode
Select [RETURN] in the menu screen or press the MENU
button.
Note
If AVLS (page 24) is set, the actual volume may be lower
than the settings.