NW-A805/A806/A808 GB.2-896-040-11(1)
28
NW-A805/A806/A808 GB.2-896-040-11(1)
29
Q The player does not work properly
A Refer to “Troubleshooting” of “Operation Guide (PDF le).”
A Reset the player by pressing the RESET button with a
small pin, etc.
All the data (including sample data) and settings you
have stored may be deleted, if you press the RESET
button while any operation is in progress.
Q To initialize (format) the player
A Be sure to format the built-in ash memory using the Menu mode on this player
following the procedure below. (Check all contents before formatting as all data
stored will be erased.)
1 Press and hold the BACK/HOME button in the stop mode until the Home
menu appears.
2 Select (Settings) – “Common Settings” – “Format” – “Yes” – “Yes,” in
this order.
Press the /// button to select the item, and then press the button to
conrm. While the memory is being formatted, an animated display appears.
When initialization nishes, “Memory formatted.” appears.
Note
Do not format the built-in ash memory of the player using Windows Explorer.
RESET button
FAQ
Q Which operating systems can be used with the player
A IBM PC/AT or compatible computer preinstalled with one of the following
Windows operating systems:
Windows 2000 Professional (Service Pack 4 or later)/Windows XP Home Edition
(Service Pack 2 or late)/Windows XP Professional (Service Pack 2 or later)/Windows
XP Media Center Edition (Service Pack 2 or later)/Windows XP Media Center
Edition 2004 (Service Pack 2 or later)/Windows XP Media Center Edition 2005
(Service Pack 2 or later)/ Windows Vista Home Basic/Windows Vista Home
Premium/Windows Vista Business/Windows Vista Ultimate
Not supported by 64 bit version OS.
Not supported by OSs other than above.
Q An error message appears on the computer when installing
A Make sure the operating system (
Back Cover) of your computer can be used with
the player.
Q The computer does not start automatically when inserting the
supplied CD-ROM
A e install wizard may not start when inserting the CD-ROM, depending on the
computer setting.
In this case, right-click the drive on Windows Explorer to open, and double-click
SetupSS.exe.
e main menu for installing appears.
Q A computer does not recognize the player
A Connect to another USB connector of your computer.
Q Some functions are restricted by software
A When you use the soware, log on as an administrator.