Filter
Top Products
35
Error message
NO COPY
NO DISC
NO SIGNAL
P/B ONLY
PROTECTED
SORRY
TEMP OVER
TR FULL
TrPROTECT
EDITING
Meaning/Remedy
• You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
b
Use analog connection instead (page 6).
• You tried to play or record with no disc in the recorder.
b
Insert an MD.
• The recorder could not detect digital input signals.
b
Make sure that the source is connected firmly (page 11).
•You tried to record or edit on a premastered MD (P/B stands for
“playback”.)
b
Insert a recordable MD.
• You tried to record or edit on a MD with the tab in the record-
protect position.
b
Slide the tab back (page 30).
• You tried to erase the track mark at the beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tired to press DIGITAL MEGA BASS when the LINE OUT jack
is plugged in.
• You tried to press P or T MARK during synchro-recording.
• Heat has built up in the recorder.
b
Let the recorder cool down.
• There is no more space for new data when you are editing the MD.
b
Erase unnecessary tracks (page 21).
• You tried to record or edit on a track that is protected from erasing.
b
Record or edit on other tracks.
• You pressed a key on the recorder while editing on the remote
control, or vice versa.