Filter
Top Products
31
Explanations
About the DSP TYPE-S for ATRAC/ATRAC3
This player supports playback with the DSP TYPE-S specification for high-level Sony MiniDisc
decks equipped with digital signal processors (DSP). This specification allows tracks recorded in
MDLP mode to be played back with high quality sound. Since this player also supports DSP
TYPE-R specification, superb sound is produced during playback in SP (normal stereo) mode as
well.
Suppressing the skips of the sound (G-PROTECTION)
The G-PROTECTION function was developed to provide a higher level of shock resistance than that of
existing players.
The player does not
work or works
poorly.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the player).
,Disable HOLD by sliding the HOLD switch to the opposite
direction of the arrow.
• The lid is not firmly closed.
,Close the lid until it clicks.
• Moisture has condensed inside the player.
,Take the MD out and leave the player in a warm place for
several hours until the moisture evaporates.
• The dry battery is weak (“LoBATT” flashes or nothing appears).
,Replace the dry battery with a new one.
• The dry battery have been inserted incorrectly.
,Insert the battery correctly.
• An MD with nothing recorded on is inserted (“BLANK” appears
in the display).
,Insert a recorded MD.
• The disc is damaged or does not contain proper recording (“Rd
ERR” appears in the display).
,Reinsert the disc. If the error message still appears, replace it
with another disc.
• While operating, the player received a mechanical shock, too
much static, abnormal power voltage caused by lightning, etc.
,Restart the operation as follows.
1 Remove the dry battery from the player.
2 Leave the player for about 30 seconds.
3 Insert the dry battery.
The player will not
play.
• A Hi-MD disc or a standard disc in Hi-MD mode is inserted.
,Hi-MD discs or standard discs in Hi-MD mode cannot be
played on this player.