Filter
Top Products
26
G-PROTECTION
No
No
SOUND
No
Yes*
B
Connecting your VIDEO CD player
Connecting a stereo
system
You can listen to CDs through a stereo
system or record CDs on a cassette tape and
a MiniDisc. For details, see the instruction
manual that comes with the connected
device.
Be sure to turn off all connected devices
before making connections.
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
When using the connecting cord
• You cannot adjust the volume of the
headphones/earphones on the VIDEO CD
player or the remote control.
• If the sound is distorted, connect the device
to the i/REMOTE jack.
When using the optical digital
connecting cord
To record the CD sound on a MiniDisc, DAT,
etc., make sure that the VIDEO CD player is
in pause before operating the recording
procedures.
About the G-PROTECTION and
SOUND functions when using the
connecting cord or optical digital
connecting cord
See the following table for valid functions
according to the types of connecting cord:
Connecting cord
Optical digital
connecting cord
* Functions only on the output sound from the
i/REMOTE jack; does not function on the
output sound from the AUDIO OUT (OPTICAL)
jack.
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
Connecting
cord
Left (white)
Right (red)
MiniDisc
recorder, DAT
deck, etc.
Optical
digital
connecting
cord
to AUDIO OUT
(OPTICAL)