Filter
Top Products
27
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see “Playing a VIDEO
CD” on page 7)
• LR6 (size AA) alkaline batteries (battery
case)
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your VIDEO CD player.
• NC-WMAA
• NH-WM2AA
1
Open the battery compartment lid.
2
Insert two rechargeable batteries
by matching 3 to the diagram
inside the battery compartment
and close the lid.
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of your VIDEO
CD player and an AC outlet, then
press x/CHG to start charging.
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
The VIDEO CD player charges the
batteries. The “CHG” indicator turns on
in the display, and the indicator sections
of light up in succession. When
the batteries are completely charged, the
“CHG” and indicators turn off.
If you press x/CHG after the charge has
already been completed, the
indicator flashes and “Full” appears in
the display.
4
Disconnect the AC power adaptor.
B
Connecting a power source
x/CHG button
(rear)
to DC IN 4.5 V
AC power
adaptor
to an AC outlet
Connecting a power source
(Continued)