Filter
Top Products
49
GB
Using an external device (with Bluetooth)
Using an external device (with Bluetooth)
Connecting to a
Bluetooth device
You can connect a Bluetooth adaptor (optional)
to the USB A/Bluetooth connector of the photo
frame and transfer images from a Bluetooth
compatible mobile phone or other device. The
transferred images are saved in internal
memory.
Note
You cannot send a file to other Bluetooth compatible
devices from the photo frame.
Compatible profiles for Bluetooth
communication
The DPF-D82/D92 supports the following
profiles:
• BIP (Basic Imaging Profile)
Image Push Responder
• OPP (Object Push Profile)
Object Push Server
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a “Profile”?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the
purposes and product to be used. To make
Bluetooth communication possible, the devices
used in the communicated should support the
same profile.
Compatible image file formats that can
be displayed
See page 64.
Maximum number of pixels that can be
handled
See page 64.
1 Connect the photo frame to the AC
power source. (.page 18)
2 Turn the photo frame to ON.
(.page 19)
3 Connect the Bluetooth adaptor
(optional) to the USB A/Bluetooth
connector.
is displayed on the upper portion of
the screen when the guide is displayed.
Note
If any device, other than the Bluetooth adaptor,
such as a memory card, camera, PC, or other
USB memory device or a USB cable is
connected to any of the memory card slots, or
the USB A/Bluetooth connector, disconnect it
from the photo frame and then connect the
Bluetooth adaptor.
4 Check the Bluetooth address.
You can display the address from [System
Information]. (page 46)
Tip
The address is displayed only when the
Bluetooth adaptor is connected.
5 Transfer an image from the
Bluetooth-compliant mobile phone,
or other device to the photo frame.
The image transferred is saved on the
internal memory.
Note
You cannot transfer an image to the memory
card of a digital photo frame.
Continued