Filter
Top Products
Symptom Cause and/or corrective action
Certain tracks cannot be played.
You tried to play files saved in a format that is not compatible
with this player (
page 5).
Change the setting of “CD-EXTRA” in the OPTION menu.
You may play your CD (
page 30).
“Low Battery” appears on the
display, and the CD does not play.
The rechargeable battery is used up completely. Charge the
battery (
page 10).
Replace the dry battery with a new LR6 (size AA) alkaline
battery (
page 12).
“Hi DC in” appears on the display.
An AC power adaptor which is rated higher than the one
supplied or recommended is being used. Use only the supplied
AC power adaptor or the car battery cord recommended in
“Optional Accessories” (
page 36).
The CD does not play, or “No Disc”
appears on the display when a CD
is placed in the player.
The CD is dirty or defective. Clean it or change it.
Check that the CD is inserted with the label side up
(
page 15).
Moisture condensation has occurred. Leave the CD player
aside for several hours until the moisture evaporates.
Close the lid of the battery compartment firmly (
page 10).
Make sure the battery is inserted correctly (
page 10).
Connect the AC power adaptor to an AC outlet securely
(
page 13).
Press
/ENTER after one second or more has passed since
the AC power adaptor was connected.
The CD-R/CD-RW in the player is blank.
There is a problem with the quality of the CD-R/CD-RW,
recording device, or application software.
“HOLD” flashes on the display
when you press a button, and the
CD does not play.
The buttons are locked. Slide the HOLD switch back
(
page 19).
Playback starts from the point you
stopped (resume function).
The resume function is working. To start play from the first
track, press and hold /ENTER ( on the remote) while the
player is stopped until the first track starts playing, or open the
lid of the player (
page 18). Or, remove all power sources,
and then insert the battery or connect the AC power adaptor
again.
During playback of an ATRAC
CD or MP3 CD, the CD does not
rotate but you can hear the sound
normally.
This player is designed to stop the rotation of an ATRAC CD
or MP3 CD during playback to reduce the power consumption.
The player is not malfunctioning.
Continued
33
Additional Information
D-NE320SP/NE329SP/NE329LIV.GB.2-318-873-14(1)