Filter
Top Products
Getting Started
11
GB
To connect/disconnect the
network unit
Connecting
1 Turn off the power switch ?/a on the
subwoofer.
2 Connect the network unit as shown below.
Disconnecting
1 Press SUSPEND to set the network unit to
the suspended mode.
2 Turn off the power switch ?/a on the
subwoofer.
3 Disconnect the network unit as shown
below.
Note
If the network unit is disconnected without first setting
it to the suspended mode, the settings may not be
saved.
For the network connections and settings, refer
to the “Quick Setup Guide” supplied with the
CPF-IX001.
5: Connecting the CPF-
IX001 to the network