32
Playing audio files
Play songs using Audio Player. You can use other applications during
playback.
Charge the battery before starting playback.
Notes
• The automatic shut-off does not function during playback.
• If the battery power level runs low, playback stops automatically. In this case,
however, you can still use other applications such as Memo Pad or Address Book.
Charge the battery before it becomes completely empty.
1
After making sure that the write protect tab is not set to
LOCK, insert the “Memory Stick” media into the “Memory
Stick” slot.
Note
If you want to transfer and play ATRAC 3 format audio files that are recorded by
OpenMG Jukebox, use “MG Memory Stick” media.
2
Connect the headphones.
3
On the home screen, rotate the JogDial navigator to select
Audio Player and then press the JogDial navigator.
Or, tap the Audio Player icon on the home screen.
Audio Player starts and then reads the TOC information including the
song name, artist name and so on of the “Memory Stick” media.
Do not remove the “Memory Stick” media at this time. If you do so, the
audio data may be damaged and a malfunction may occur.
Note
• Depending on the number of songs stored in the “Memory Stick” media, it
may take several seconds to read the TOC data. You cannot operate Audio
Player while it is reading the TOC information including the song name, artist
name and so on; this is not a malfunction.
• If the write protect tab of the “Memory Stick” media is set to LOCK, Audio
Player cannot play some songs.
Playing audio files on your CLIE handheld
Continued on next page