Filter
Top Products
17Setting Up
Setting Up
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92
3 Connect the black wires to (-) minus and the red
wires to (+) plus terminals; the right speaker wires
to the RIGHT and the left speaker wires to the
LEFT terminals of SPEAKER OUTPUT.
2 Connecting the AC power sources
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
3 CFD-Z120/Z130 only: Inserting batteries
into the remote
Insert two size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
4 Using the player on batteries
Insert six size D (R20)
batteries (not supplied)
into the battery
compartment.
To use the player on
batteries, disconnect the
AC power cord from the
player.
continued
Notes
• When you operate the
player on batteries, the
backlight in the display
does not light (CFD-
Z130 only).
• Use the AC power
source whenever you
record since recording
consumes much power.
Tip
Replace the batteries
when the OPR/BATT
indicator dims or when
the player stops
operating. Replace all
the batteries with new
ones. Before you
replace the batteries, be
sure to take out the CD
from the player.