Filter
Top Products
Basic Operations
13
GB
To Press
stop recording xZ
pause recording X
Press the button again to
resume recording.
turn on/off the player
OPERATE
(or POWER, see page 2)
3 Press z to start recording
(n is depressed automatically).
Use these buttons for additional operations
Tips
• Adjusting the volume or the
audio emphasis (see page
21) will not affect the
recording level.
• If the AM/MW/LW
programme makes a
whistling sound after you've
pressed z in step 3, press
MODE to select the
position of ISS
(Interference Suppress
Switch) that most decreases
the noise.
• For the best results, use the
mains as a power source for
recording.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want to
erase.
2 Press TAPE.
3 Press z.
xZ
OPERATE
(POWER)
TAPE
X
z
MODE