Sony CFD-S35CP Portable CD Player User Manual


 
27
GB
The sound drops out.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged.
Place the player in a location free from
vibration.
Clean the lens with a commercially available
blower.
The sound may drop out or noise may be
heard when using poor quality CD-Rs/CD-
RWs or if there is a problem with the
recording device or application software.
“NOT MP3” is displayed.
You are trying to play a file that is not an
MP3 file but has extension “mp3”. (page 31)
“NOT MP3” and “LAYER 1”, or “NOT MP3”
and “LAYER 2” are displayed alternately.
You are trying to play an MPEG1 Audio
Layer-1 or 2 file. You can only play MP3
(MPEG 1 Audio Layer-3) files on this player.
(page 31)
“no MP3” is displayed.
There are no MP3 files on the disc.
Radio
The audio is weak or has poor quality.
Replace all the batteries with new ones if
they are weak.
Move the player away from the TV.
If you are using the remote while listening to
AM or MW/LW radio, noise may be heard.
The picture of your TV becomes unstable.
If you are listening to an FM programme near
the TV with an indoor antenna, move the
player away from the TV.
Troubleshooting
General
The power is not on.
Connect the mains lead to the mains securely.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if
they are weak.
You cannot turn on the player with the
remote when you operate the player on
batteries.
The power is not on, and "BATT" and
“ERROR” are displayed alternately.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if
they are weak.
There is no audio.
Adjust the volume.
Unplug the headphones when listening
through speakers.
Noise is heard.
Someone is using a portable telephone or
other equipment that emits radio waves near
the player. t Move the portable telephone,
etc., away from the player.
CD Player
“no DISC” is displayed even when a CD is
in place.
Insert the CD with the label surface up.
The CD-R/CD-RW is blank.
The CD-R/CD-RW was not finalized.
Finalize the CD-R/CD-RW with the
recording device.
There is a problem with the quality of the
CD-R/CD-RW, recording device or
application software.
The CD does not play.
Make sure that the CD compartment is
closed.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the CD
compartment open for about an hour to dry
moisture condensation.
Make sure “CD” appears in the display.
Replace all the batteries with new ones if
they are weak.