Filter
Top Products
14
iPod (CDX-M50IP/MR50IP)
Playing back iPod
By connecting an iPod to the dock connector at
the rear of the unit, you can listen on your boat’s
speakers, while controlling the iPod from the
unit.
Notes
• When an iPod is connected to the dock connector,
operation from the iPod cannot be performed.
• Before connecting the iPod to the dock connector,
turn down the volume of the unit.
• When not using the dock connector, use the
supplied dock connector cap to prevent water
entering.
Playing tracks
1 Connect the iPod to the dock
connector.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.
2 Press (SOURCE) repeatedly until “PD”
appears.
“PD 1 PORTABLE” appears, and the tracks
on the iPod start playing automatically from
the point last played.
3 Press (MODE) to select the play mode.
The mode changes as follows:
RESUMING t ALBUM t ARTIST t
PLAYLIST
4 Adjust the volume.
Press (OFF) to stop playback.
Tips
• When the iPod is connected to the dock connector,
the mode changes to the Resuming mode. In
Resuming mode, pressing (3) (Repeat),
(4) (Shuffle) or (5) (Scan) does not function. If you
cancel Resuming mode by pressing (MODE) or
(ALBM) +/–, (3) (Repeat), (4) (Shuffle) or
(5) (Scan) now function to change the play mode.
• When the ignition key is turned to the ACC position,
or the unit is on, the iPod will be recharged.
• If the iPod is disconnected during playback,
playback will pause.
Note
An another iPod cannot be connected using the XA-
110IP or XA-120IP.
Display items
To change display items, press (DSPL).
Note
Some letters stored in iPod may not be displayed
correctly.
Setting the play mode
Selecting Album, Artist or Playlist
1 During playback, press (MODE).
The mode changes as follows:
ALBUM t ARTIST t PLAYLIST
Skipping albums, artists and
playlists
>
.
M
E
N
U
To Press
Skip (ALBM) +/–
[press once for each]
Skip
continuously
(ALBM) +/–
[hold to desired point]
Track/album/artist name, Track number,
Elapsed playing time, Clock