Filter
Top Products
10
Card remote commander
RM-X151
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
qk < (.)/, (>) buttons
To control CD/radio/PD*
1
, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
ql DSPL (display) button
To change display items.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD/PD*
1
, the same as (ALBM)
+/– on the unit.
Setup, sound setting, etc., can be operated by
M m.
wf SCRL (scroll) button
To scroll the display item.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 CDX-M50IP/MR50IP only
*2 In the case of a CD/MD changer or SAT tuner
being connected; when (SOURCE) is pressed, the
connected device (“MD,” “XM” or “SR”) will appear
in the display, depending on which device is
connected. Furthermore, if (MODE) is pressed,
you can switch the changer, or SAT tuner band.
(A SAT tuner can only be connected to the CDX-
M50IP/M30.)
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
About AUX cap
When not using the AUX input jack (5), use the
supplied AUX cap to prevent water entering. Keep the
AUX cap out of the reach of children to prevent
accidental swallowing.
OFF
DSPL
SCRL
SEL
SOURCE
MODE
132
465
ATT
VOL
+
–
+
–
3
ws
q;
1
wf
qk
ql
wa
w;
wg
wd