Slick MP316CB-2 MP3 Player User Manual


 
Precautions in using the headphones
● Do not use the headphones while driving
an automobile or riding a bicycle. It is
dangerous, and against the law. To avoid an
accident, do not turn up the volume of the
headphones too high while walking.
● It is not recommended that you use the headphones at a high volume for an extended
time, as this may cause hearing damage.
3
4
5 7
6
9 8
10
2
1
Location of controls
1. [ ] - Press and HOLD to turn the player “ON” or “OFF” / Enter / Enter
submenu for all modes
2. Headphone jack
3. Cap for USB connector
4. Display screen
5. [◄ ] - Left / Previous button
6. [ ►] - Right / Next button
7. [ ▲] - Volume up
8. [ ▼] - Volume down
9. [►ІІ] - Play / Pause button / Press and HOLD to enter the main menu
10. Microphone
Battery installation (battery not included)
● Remove the USB cap.
● Open the battery cover on the back of the player by sliding it in the direction of
the arrow.
● Insert one alkaline “AAA” size battery into the battery compartment.
● Replace the battery cover.
Battery level indication
The approximate power levels of your battery are indicated as follows:
Full Two-thirds full Half full Low Empty
2
Specification
Audio Format
MP3 bit Rate
WMA bit rate
S/N rate
Dynamic range
Distortion
Power out
EQ
MP3/WMA/WAV
8 ~ 320 Kbps
32 Kbps~320 Kbps
≥ 85 dB
≥ 80 dB
< 0.2 %
2 x 5 mW
Natural, Rock, Pop,
Classic, Soft, Jazz,
DBB, SRS WOW
Size (L x W x H)
Weight
Frequency
response
Dynamic current
Power off current
Recording format
85 x 28 x 20.5 mm
< 25 g (without accessories)
20 Hz ~ 20 KHz
≤40mA(Play MP3,
backlight off)
≤ 0.30 mA
WAV
13
The shipping address of the authorized
service center is:
Southern Telecom Inc.
ATTN: Returns Department
14-C 53rd Street
Brooklyn, NY 11232
Limited Warranty
In the unlikely event that this product is defective, or does not perform properly, you may
within ninety (90) days from your original date of purchase return it to the authorized service
center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
- Provide proof of the date of purchase within the package (dated bill of sale).
- Prepay all shipping costs to the authorized service center, and remember to insure your
return.
- Include a return shipping address (no P.O.Boxes), a telephone contact number, and the
defective unit within the package.
- Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or similar model of equal
value if examination by the service center determines this product is defective. Products
received damaged, as a result of shipping will require you to file a claim with the carrier.
Continued →