Filter
Top Products
12
There are two parts to setting up your Home Kit. First, connecting the Home Dock
to your stereo or powered speakers, then placing and aiming the Home Antenna.
Let’s start with getting your Home Dock set up.
Step 1: Connect the Home Dock
When installing the Home Dock in your home, choose a location in close proximity
to your home stereo system or powered speakers, and also where the cable from
the Indoor/Outdoor Antenna can reach the Home Dock. The location should be
easily accessible and provide good visibility of the display, but should not be
located where it will be in direct sunlight, which will affect the visibility of the
display screen.
You will also need to decide whether you will be connecting your Home Dock to
your home stereo system using the provided Stereo Audio Cable, or directly to
powered speakers.
Connect the Indoor/Outdoor Antenna
Once you have selected a location, connect the antenna to the ANT IN connector
at the rear of the Home Dock. (After
completing a few additional steps,
we will work on the location of the
antenna.)
Home Installation
AUDIO OUT ANT IN DC IN