12
Handling and operation
SKRD 30 A1
GB
IE
Setting the time
Prerequisite: The device is in the operational mode clock/standby operation.
Press the Bass/AMS/Mode ♦
7
button once. The time of day indicator
begins to blink.
Set with the buttons Tune+ ♦
13
and Tune–
12
the current time of day. With
each button press the time of day changes by one minute. Holding down
the respective button for more than 2 seconds starts the speed setting.
Press the Bass/AMS/Mode ♦
7
button again to save the current setting and
move to the next menu item.
NOTICE
The time of day will revert back to 00:00 o'clock if the device is disconnected ►
from the mains power supply and no battery is inserted or if the battery is too
w
eak.
Setting the date
Prerequisite: The device is in the operational mode clock/standby operation.
Press the Bass/AMS/Mode ♦
7
button twice. The date indicator begins to
blink.
Set with the buttons Tune+ ♦
13
and Tune–
12
the current date. With each
button press the date is changed by one day. The weekday indicator changes
automatically. Holding down the respective button for more than 2 seconds
starts the speed setting.
Press the Bass/AMS/Mode ♦
7
button again to save the current setting and
move to the next menu item.
NOTICE
The date will revert back to 01.01.2010: if the device is disconnected from ►
the mains power supply and no battery is inserted or if the battery is too weak.