Filter
Top Products
- 9 -
3. Should the currently adjusted station trans-
mit RDS data, the
indicator in
the display o blinks. Then the display
o shows the name of the radio station,
and the time is updated (if activated in
the settings, see section "Setting Update
function"). During a running time update
via RDS the clock icon in the display o
ashes.
Automatic station search
You can have the kitchen radio search for
stations. The kitchen radio searches the fre-
quency range until it nds a station.
1. Press and hold the button UP 1( for two
seconds: the kitchen radio searches for
the station with the next highest frequency.
2. Press and hold the button DOWN
l for two seconds: the kitchen radio
searches for the station with the next low-
est frequency.
Repeat these steps until you have found a
radio station to your liking.
Save and recall a radio station manually
As the appliance can be used by numerous
people, it is tted with user switching, A/B.
Both users can save dierent radio stations.
To switch between users, press and hold the
button USER/BASS d for two seconds.
Each user can save 32 radio stations in the
appliance. Available for this are:
Preset button M1 r for the save positions
A0 – A7,
Preset button M2 t for the save positions
B0 – B7,
Preset button M3 y for the save positions
C0 – C7, and
Preset button M4 u for the save positions
D0 – D7.
Press the corresponding preset button once
to address the save position "0", press twice
for "1", etc.
1. Set the user and the desired radio station.
2. Press the button MEM SET/AMS h.In
the display o the "MEM" indicator blinks.
If the memory location button r– u has
been pressed previously, the memory loca-
tion indicator and the MEM" indicator blink.
3. Press one of preset buttons M1–M4
r–u, if necessary repeatedly, to save
the radio station to the desired save posi-
tion. In the display o, the indicator for the
save position selected by you and "MEM"
blink.
4.
Press the button MEM SET/AMS h once
again. "MEM" and the save position are
constantly indicated, the radio station is
saved.
5. Repeat the steps 1 to 4 (for both users)
until all of the desired radio stations are
saved.
6. To recall the saved radio stations, press
the corresponding preset buttons (M1–
M4 r–u) in radio mode, several times
if need be, until the number of the saved
position appears in the display o.
Automatically save and recall a radio
station
With the AMS function (Automatic Memory
System), the radio automatically searches
for stations and stores them at the memory
locations. Previously saved radio stations are
thereby erased.
1. Press and hold the button MEM SET/
AMS h for two seconds. The kitchen ra-
dio automatically searches for suciently
powerful radio stations and saves them in
the memory.
2. The station search can be stopped by press-
ing on the button MEM SET/AMS h. The
most recently found radio station plays.
3.
When you press the button MEM SCAN
f, the saved radio stations are recalled
in their sequence and each is played for
15 seconds.
4.
To quickly move on to another radio sta-
tion, press the button MEM SCAN f.
5.
To quit the automatic recall, press the but-
ton MODE/
j. The display o will
then show the time for 15 seconds.
BDA_KH 2398 - DT-49029_6_uk.indd 9 22.06.2010 17:28:48