Filter
Top Products
- 14 -
Setting the time
1. Press the button
TIME SET.
The time on the display blinks.
Note:
Complete the adjustments within 10 seconds. After ca. 10 seconds the
appliance returns to its start setting. The adjustments completed to this
point will be taken over.
The button
HOUR+ SET can be pressed numerous times in succession or held
down firmly.
2. Press the button
HOUR+ SET to set the hours.
3. As soon as the desired hour indication is shown in the display release
the button. The button
MIN+ SET can be pressed numerous times in
succession or held down firmly.
4. Press the button
MIN+ SET to set the minutes.
5. As soon as the desired minute indication is shown in the display,
release the button.
6. Press the button
TIME SET or wait a few seconds. The programmed time
will be taken over.
Selecting the 12 hour or the 24 hour modus
Press and hold the button
BAND for about 2 seconds.
In the display “24Hr” blinks to indicate the 24-hour mode.
Within 10 seconds repeatedly press the button
MIN+ SET to switch
between the 12-hour mode (“12Hr” blinks) and the 24-hour mode.
Press the button
BAND or wait a few seconds.
The selected mode is taken over. In the 12-hour mode the indicator PM
appears under the time display for the hours of the afternoon/evening.
IB_KH2217_AR23896_LB6 24.09.2008 15:33 Uhr Seite 14