Sharp XL-HF200PH(S) MP3 Docking Station User Manual


 
10/5/26 XL-HF200PH(S)(BK)_AUS.fm
19
Timer and sleep operation (Remote control only) (continued)
Notes:
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, select
“USB” or “AUDIO IN” or "LINE IN" in step 5.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
Checking the timer setting:
Cancelling the timer setting:
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
The radio, compact disc, iPod, USB, Audio In and Line In
can all be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer Call”, and press the ENTER button.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer Off”, and press the ENTER button. Timer
will be cancelled (the setting will not be cancelled).
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the or button to
select “Once” or “Daily”, and press the ENTER button.
3 Within 10 seconds, press the or button to
select “Timer On” , and press the ENTER button.
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
Sleep operation
1
Play back the desired sound source.
2 Press the SLEEP button.
3 Within 5 seconds, press the direct search button to set
the time. (1 minute ~ 99 minutes)
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 5 seconds, press the "0" button twice until
“SLEEP 00” appears.
To use timer and sleep operation together
1
Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 18).
Desired time
1-99 minutes
Sleep operation will
automatically stop
Sleep timer
setting
Timer playback
setting
End
time
Timer playback
start time