Filter
Top Products
PLAYING A MINIDISC
BASS
1 Insert the headphones plug firmly into
the headphones jack on the remote
control unit.
2 Plug the remote control unit into the
jack on the main unit. Push the plug
all the way in.
● Since the remote control unit plug has
only one correct orientation, plug it in as
shown in the drawing.
3 Load a MiniDisc in the direction indi-
cated by the arrow on the MiniDisc, with
the label side facing up. (Insert the Mini-
Disc firmly, until a click is heard.)
● The power will be turned on automat-
ically, and playback will start from the
first track. (Auto-play function)
● After playback of the last track has fin-
ished, the unit will stop automatically.
4 Press the VOLUME + button to in-
crease the volume and the VOLUME –
button to decrease the volume.
5 Adjust the bass level.
Each time the BASS button is pressed,
the tone will be switched as follows:
● The most recent volume or bass set-
tings are saved when the power is
turned off.
Note:
● Whenever any button is pressed, the
remote control display will light for
about 4 seconds.
(0 - 30)
When track names are included on the
MiniDisc, the track names will be scrolled.
Track number
BASS 1
BASS 0
BASS 3
BASS 2
Bass is emphasized more.
Bass is emphasized a little.
Bass emphasis is canceled.
Bass is emphasized still
more.
Remote
control unit
Headphones
For the
right (R)
For the
left (L)
To the jack
8
MD-S301