Sharp MD-S301 Portable CD Player User Manual


 
When using the unit with just the
battery in the battery case:
The auto-play function will not work.
To start playback, hold down the /
( ) button for about 1 second.
Even if a MiniDisc is replaced while the
power is turned off, the random or re-
peat play settings will remain un-
changed in memory.
Precautions when making connec-
tions:
Do not use any remote control unit, ex-
cept for the one included with this unit.
Insert each plug securely, all the way
in.
Be sure to hold the plug when removing
it. If you pull on the cord, it may break,
or the unit may malfunction.
Interrupted sound:
This product is designed to eliminate
interruptions in the sound which can be
caused by vibrations. However, if the
unit is continuously exposed to vibra-
tions or mechanical shock, the sound
may be interrupted momentarily.
Note while in the playback mode:
If you do any of the following during play-
back, the volume and the tone settings may
not be stored correctly.
Plug or unplug the AC adaptor.
Remove the rechargeable battery or
the alkaline battery.
Plug or unplug the car adaptor or turn
off the car’s ignition key.
When the sound is distorted:
If the volume is too high while the bass
is being emphasized, the sound may be
distorted, depending on the music on
the track. If this happens, decrease the
bass level or lower the volume level.
If the volume is increased to “23" or
higher, the bass level will be adjusted
automatically.
(This is done to reduce the distortion in
the sound.)
Cautions:
When the unit is not to be used imme-
diately after a MiniDisc has been in-
serted, or when you plan to carry the
unit, turn off the power or cancel the
auto-play function. Otherwise, the auto-
play function will be activated and the
battery will run down.
When a MiniDisc is inserted, if any re-
sistance is felt, do not force the Mini-
Disc into the unit. It may cause more
problems. If resistance is felt, remove
the MiniDisc and try reloading it.
Since the main unit and the AC adaptor
can heat up during use, you should
avoid allowing the unit to be in direct
contact with your skin for any length of
time.
When using the unit with a car
adaptor:
When switching off the ignition during
playback, the power to this unit will also
be turned off. When the ignition is
switched on, playback will start from the
beginning of the track where playback
was halted (Resume auto-play func-
tion). However, the power to the unit
may not be turned off when the ignition
is turned off, depending on the type of
car.
To interrupt playback:
Press the button on the remote control
unit during playback.
To resume playback, press the button
again.
To stop playback:
Press the :OFF () button.
When you press the / ( ) button
to resume playback, it will start at the point
on the disc where playback was halted
(Resume function). However, if the Mini-
Disc is removed and reinserted, playback
will start from the first track.
To turn off the power:
Press the :OFF () button while in the stop
mode.
If the unit is not operated for at least 2
minutes while in the stop mode, the power
will be turned off automatically.
To remove the MiniDisc:
Turn off the power and move the EJECT lever
in the direction indicated by the arrow.
9
MD-S301