Scott SCR120 Clock Radio User Manual


 
8
SETTING THE TIME, THE FIRST TIME
IMPORTANT: The first time you connect your new E-Z Set clock radio to the AC
outlet the internal computer will automatically set the time correctly for the
Eastern Time Zone, which is the initial default setting.
The display will scan for a few
seconds and then set the correct
Month, Date, Day and Time in the
Eastern zone.
If you live in the Eastern Time zone, theres nothing else to do. Your clock is set
correctly and running.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the E-Z Set will remember
the new default zone setting and will always return to that setting after a power
interruption.
There are 7 time zones programmed into your E-Z Set clock radio as follows:
Zone 01 Atlantic Time
Zone 02 Eastern Time (Default Setting)
Zone 03 Central Time
Zone 04 Mountain Time
Zone 05 Pacific Time
Zone 06 Yukon Time
Zone 07 Hawaiian Time
To change the default time zone display, depress the TIME ZONE button.
The word ZONE appears in the
main display, and the number 2 will
appear on the small display,
indicating that the default zone is
Zone 2, Eastern Time.
Hold the TIME ZONE button and then press either the UP or DOWN buttons until
your own time zone appears on the display, then release the buttons. The clock
display will change to the correct time in the time zone you selected. The clock will
always return to the correct time in the zone you selected after every power
interruption. If you move to a different time zone, simply change the default zone
display to the new zone and the E-Z Set will remember that setting for you.
OPERATING INSTRUCTIONS
SCR120_080206.p65 2/8/2006, 15:568