Filter
Top Products
-E20-
Load the disc with the label facing up on the disc tray.
(Please refer to “MP3/WMA CD OPERATION” on page
E18.)
• “Picture CD” appears briefly on the TV screen.
• The first thumbnail pictures (maximum 9-picture)
appear on the TV screen.
Example:
Press [4], [a], [5] or [b] to move the cursor to the
desired picture.
• To go to the next or previous thumbnail pictures,
press [NEXT] or [PREV].
• You can also select the desired picture from the file
list. See “Selecting a picture from the file list” on page
E19.
Press [ENTER] (or [PLAY]) to start slide show from
the selected picture.
• If you press [PAUSE] during the slide show, the slide
show stops temporary. “
k
” appears briefly on the
picture.
Press [PLAY] (or [NEXT]) again to resume the slide
show.
• If the picture appears upside down or sideways,
please do the following steps.
1) Press [PAUSE], if necessary.
2) Press [ANGLE] repeatedly until it’s right side up.
Example:
3) Press [PLAY] (or [NEXT]) to skip to the next picture
and continue the slide show.
• If you press [NEXT] or [PREV] during the slide show, it
skips to the next or previous picture.
• If you press [TOP MENU],
the file list appears.
1
2
TOP MENU
ANGLE
MENU
PREV
NEXT
STOP
PLAY
PAUSE
,,,
ENTER
To Start the Slide Show
The slide show enables you to view pictures (files) one after
another automatically.
Preparation:
1. If a disc loaded, remove the disc first.
2. Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds”
or “15 Seconds” (see page E34).
3
After the last picture has displayed, the thumbnail pictures
appear.
• To stop the slide show, press [STOP]. The thumbnail pictures
appear on the TV screen.
• If [MENU] pressed during the slide show, the thumbnail
pictures appear.
➡
Notes:
• FUJICOLOR CD can be used.
• Some discs cannot be played back
depending on the recording conditions.
• MP3 or WMA file on the KODAK Picture
CD is not recognized on this unit.
KODAK and Picture CD are registered
trademarks of Eastman Kodak Company.
•“
”, “ ”, “ ”
or “
” appears briefly
on the TV screen.
Important Note:
“ ” may appear on the TV screen during
operation. This icon means that the function
is not available on the disc now.
5D90401A P14-23 26/06/2003, 16:5320