Sangean Electronics WR-2 Portable Radio User Manual


 
12
Sleep timer
The sleep timer will automatically switch off the radio after a preset
time has elapsed.
1. Press and continue to hold down the Power On/Off/Sleep button,
the display will cycle through the available sleep times in the order
60-45-30-15-120-90-60. Release the button when the required
sleep time appears in the display and the radio will play the last
station selected.
2. To cancel the sleep function, press On/Off button,
the symbol will disappear.
Display backlight
To turn on display illumination, press and release Light button.
By pressing and releasing Light button, you may also adjust display
brightness or turn off the illumination completely.
Operating your radio
Operating your radio FM
Connect the antenna
The radio comes with Built-in AM/FM antenna. To improve
FM reception, insert the end of the supplied FM wire antenna into the
F-type antenna terminal and adjust the wire for best reception.
A 75 ohm coaxial cable of outdoor antenna may also be attached to
the terminal. Be sure to switch external/internal antenna switch to
External position while using the supplied wire antenna or connect
the outdoor antenna. In some European countries, you may have to
connect the supplied antenna terminal adaptor to connect with the
outdoor antenna.
GB