Filter
Top Products
11
RADIO OPERATION
Turn on the radio by pressing the Power on/off key [1]
Tuning Desired Stations
Manual Station Selection… ..
Using + or - Tuning Button [18] tune to the desired station.
Automatic Station Selection… ..
Press and hold + or – Tuning Button [18] for more then ½ second and
release. The radio will search for the next active station.
Automatic Station Memory Programming (ATS)
When the radio is first activated the ATS feature will automatically
select, based upon signal strength, 7 AM and 7 FM stations and
automatically position them into the associated presets.
If you wish to repeat this process, select the desired band by
pressing band selection button [20] and then pressing and holding
the ATS button [16] for more then 4 seconds.
Manual Station Memory Programming
Select desired frequency using Manual Station Selection
Press and hold desired preset button for more then 2 seconds until
a beep is heard and M stops blinking
The selected station is now stored in the desired preset position.
When you store a new station in a preset memory slot, the station
previously in that slot is automatically erased.