Sangean Electronics RCR-10 Clock Radio User Manual


 
18
GB
FM range setting
FM range are different from countries to countries. It is necessary to
adjust FM range to allow the radio to work properly.
1. Press and hold the INFO/MENU button to enter the menu setting.
2. Rotate the TUNING control till the range of FM shows on the
display (refer to the picture in the right). Press the control to
select the desired FM range. FM range setting is then completed.
The available FM range is as following:
87-108 for the common area (default)
76-90 for Japan
64-108 for Eastern European countries and Russia
76-108 for some of China area and European countries
FM stereo (auto) / mono
If the FM radio station being listened to has a weak signal some hiss
may be audible. It is possible to reduce this hiss by forcing the radio
to play the station in mono rather than stereo.
1. Press the Source button as needed to select the FM radio mode
display and tune to the required FM station as previously
described.
2. Rotate the Tuning control until the FM Stereo / mono setting shows
on the display. If the setting is Auto press the Tuning control to
switch to Mono mode to reduce the hiss.
3. To return to Auto (stereo) mode press and release the Tuning
control to alter the setting, so that the radio will switch back to
Auto mode.
2