Filter
Top Products
6
Operating the radio-search tuning
1. Switch on your radio by pressing the Power Button.
Note: The radio is originally set to be 90 minutes auto
shut off after Power is switched on ( symbol
will appear on the display). If you don’t need
this feature, press Power button for more than
2 seconds until symbol removed from the
display .
2. Select the required waveband by repeatedly
pressing the Band button. On FM and TV bands,
fully extend the Telescopic aerial. On AM (MW)
band, rotate your radio for best reception.
3. Press and hold down either the Tuning Up or Down
buttons until frequency in the display begins to
change rapidly. Release the button.
4. Your radio will scan the selected waveband,
stopping each time if finds a station of sufficient
strength. Adjust the volume control to the required
level.