Filter
Top Products
Note › The player will turn off if the microSD card is removed while in Playback or Idle/Pause mode.
› The player will pause while in Play state if the earbuds are removed.
› The player will turn off after one minute in Pause mode.
› The player will pause when playback reaches the end of last track.
› Playback will restart from the first track when the Play button is pressed within one minute.
› Otherwise, the player will shut down.
› Fast Forward and Rewind: The longer you hold down the ( ) or ( ) button, the faster your
player will scan (up to 8x). The LED will blink faster as the speed increases.
LED Operations
Action
› Power On / Off
› Power On with no microSD card
› Paused
› Playing
› Fast Forward / Rewind
› Skip Forward / Skip Back
› Take microSD card out in
Playback / Pause mode
Putting Your Songs On A Card
Not only does the Sansa slotMusic Player work with slotMusic cards; you can also make your own
content card from your music library. The Sansa slotMusic Player supports microSD and microSDHC
(high capacity) cards. You can use MP3 files up to 320kpbs or DRM-free WMA files up to 192kbps.
Connect the microSD card to your computer with a microSD to USB adapter (available
at ). Your microSD card must be formatted as either FAT or FAT32.
(These formats can be read by both Windows and Mac computers.) Many cards are ready
to go out of the box and do not require formatting.
Caution: Formatting a card will erase all data.
6
lll#hVchV#Xdb$hjeedgi
lll#h]dehVchV#Xdb
lll#hVchV#Xdb$[dgjbh
Behavior
Stays on for 2 seconds then fades off.
Flashes for 3 seconds, then the player shuts down.
Pulses for 1 minute, then shuts down.
LED off.
Flashes with increasing speed as scan speed increases.
Flashes once for each press.
Flashes for 3 seconds, then the player shuts down.