Filter
Top Products
51
SpecificationsTroubleshooting
50
Model YP-F1
Built-in Memory capacity 256MB(YP-F1 V), 512MB(YP-F1 X), 1GB(YP-F1 Z)
Voltage 3.7V (Li-polymer)
Playing time
lasts up to 10hours(On the basis of measurement by the company)
Dimensions/Weight 29 X 63.5 X15 mm / 32 g
Case Plastic/Steel
Noise Ratio 92dB with 20KHz LPF
Earphones Jack Output Power 14mW(France 5mW/CH) (16Ω)
Output Frequency Range 20Hz~20KHz
Operating Temperature Range -5 ~ +35°C(23~95°F)
FM Frequency 87.5 ~ 108.0 MHz
FM Signal to Noise Ratio 58dB
FM T.H.D 1%
FM Useable Sensitivity 10dB
File Support
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA, ASF (48Kbps ~ 192Kbps, 8KHz ~ 48KHz), Ogg
The player is automatically turned off.
● In Stop mode, the power may automatically be turned off depending on settings.
● Check to see if there are files saved in it.
Play Time is not displayed correctly during playback.
● Check to see if the file is a VBR(Variable Bit Rate) file.
LCD display is dark.
● Check the Contrast setting.
The file name and Tag information are not displayed correctly.
● Select [Settings] ➔ [Language] ➔ [ID3-Tag] from the menu and change the Language
setting.
There is a file saved in the player, but “No File” appears in the screen.
● After checking whether the folder is played, use the Navigation function to change the
folder.
● Connect the player to the computer and run YP-F1 Updater from the Desktop to update
the player. When the Update screen appears, select [Format Data Area] in the Download
option and update.
I cannot properly connect the player to the computer.
● Win98 : Try to connect again after installing the driver.
● WinME : Remove the driver program and the select the Start and then Windows Update on
the Desktop. After selecting important update and service pack, execute update all.
● Win2000/XP : Try to connect it again after rebooting the computer.