Filter
Top Products
4.6
Using Dynamic Range Compression (DRC)
When you switch channels, the volume may vary depending on the channel. The Dynamic
Range Compression function can adjust the volume difference automatically.
1
Press the MENU button on the remote control.
2
Use the Menu Up/Down buttons to
highlight the Setup icon and
press ENTER.
3
Use the Menu Up/Down buttons to
highlight the DRC: On(Off) icon and
press ENTER.
Use the Menu Up/Down buttons
to alternate between DRC: On
and DRC: Off and press ENTER
again.
4
Press EXIT.
CHAPTER FOUR
Special Features
4
4